HP StorageWorks 300, Руководство пользователя

Страница: 116 / 180

• View or delete noti fi cation alerts
• Add, view, or delete mail servers to route noti fi cation alerts
• Add, view, or delete mail addresses for noti fi cation alerts
• Add, view, or delete SNMP management consoles to receive noti fi cation alerts
Table 9 CLI monitoring commands
Command
Usage
1
getHealth
Returns the VLS health status as a number (0-good,
1-degraded, 2-critical, 3-failed, 4-missing).
getChassis
Returns information about the VLS displayed on the
Identity Tab window.
getNodeNames
Returns the list of nodes in the VLS.
getNodeFault
Returns fault information for the speci fi ed node. Where
the options are:
-a <s>
- Node name (Head_0, ...) (required)
-h
- Displays command usage information (optional)
getNotificationsCount
Returns the number of noti fi cation messages speci fi ed
counting back from the most recent. Where the options
are:
-n <n>
- Maximum number of noti fi cations to return
(required)
-h
- Displays command usage information (optional)
getNotificationsDate
Returns all the noti fi cation alert messages that occurred
starting with the speci fi ed date. Where the options
are:
-d
- mm/dd/yy on or after this date (required)
-h
- Displays command usage information (optional)
deleteNotifications
Deletes the speci fi ed noti fi cation alerts from the VLS.
Where the options are:
-id <s>
- ID number of noti fi cation to delete
(required)
-h
- Displays command usage information (optional)
addEmailServer
Speci fi es an mail server with an SMTP gateway to
route noti fi cation alerts from the VLS. Where the
options are:
-a <s>
- E-mail server address (required)
-c <s>
- node IP address (required)
-h
- Displays command usage information (optional)
getEmailServer
Returns the mail server con fi guration settings for
noti fi cation alerts.
deleteEmailServer
Deletes the speci fi ed mail server from the mail
noti fi cation alerts settings. Where the options are:
-a <s>
- E-mail server address (required)
-c <s>
- VLS node IP address (required)
-f
- Force - Do the delete without a prompt (optional)
-h
- Displays command usage information (optional)
116
CLI command set