HP StorageWorks 300, Руководство пользователя

Страница: 110 / 180

Table 7 CLI con fi guration commands
Command
Usage
1
updateFC
Changes the default FC host port connection settings. Where
the options are:
-a <n>
- ID number of node to modify (0, ...) (optional)
-i <n>
- Fibre Channel index (0, 1, ...) (required)
-l <n>
- If attached in arbitrated loop mode, speci fi es a
hard ALPA value between 0 and 125. A value of -1 speci fi es
a dynamically assigned ALPA. If not attached to an arbitrated
loop, this parameter is ignored (required)
-r <n>
- Port number of the FC port to modify (required)
-s <n>
- Preferred speed(s) (0-Auto, 1-One GB, 2-Two GB,
4-Four GB, or 10-Ten GB) (required)
-t <n>
- Preferred topology(s) (0-Auto, 1-Point to Point, 2-Loop,
3-Fabric, or 4-Public Loop) (required)
-h
- Displays command usage information (optional)
setOverSubscription
Enables or disables oversubscription and speci fi es the percent
storage remaining for noti fi cation. Where the options are:
-e <n>
- Enable/disable oversubscription (0-Disabled or
1-Enabled) (required)
-p <n>
- Percentage of capacity remaining for alert noti fi cation
(required)
-h
- Displays command usage information (optional)
getOverSubscription
Returns whether the oversubscription feature is enabled or
disabled and the capacity remaining percentage for noti fi cation
alert. Oversubscription is enabled when "
enabled = 0
".
Oversubscription is disabled when "
enabled = 1
".
getLunMap
Returns existing LUN mapping con fi gured on the VLS for the
LUN speci fi ed. Where the options are:
-a <n>
- Number of the node (0, ...) (required)
-l <n>
- LUN number of device whose LUN map you wish
to view (required)
-h
- Displays command usage information (optional)
getLibTypes
Returns a list of available library emulation types. Displays
each library emulation’s name, type, product, revision, and
vendor information.
createLibrary
Creates a new library with the speci fi ed maximum number of
cartridge slots, input/export ports, and tape drives. Where
the options are:
-a <n>
- Node ID of the node on which the library emulation
will reside (0, ...) (required)
-l <n>
- LUN number to assign to library (-1 to 128) (optional)
-n <n>
- Maximum number of tape drives (required)
-p <s>
- Product (spaces allowed) (MSL6000, ...) (required)
-pm <n>
- FC port to which this library is mapped (0, 1, ...)
(required)
-pt <n>
- Maximum number of input/export ports (required)
-r <s>
- Revision (0430, ...) (required)
-sl <n>
- Maximum number of cartridge slots (required)
-t <s>
- Library type name (required)
-v <s>
- Vendor (HP, ...) (required)
-y <n>
- Library type to emulate (2051, ...) (required)
-h
- Displays command usage information (optional)
110
CLI command set