HP StorageWorks 300, Руководство пользователя

Страница: 113 / 180

Command
Usage
1
createCartridge
Creates the speci fi ed number of cartridges with the speci fi ed
barcode and associated with the speci fi ed library.
Note: If you specify more cartridges than slots de fi ned for
the library, this command only creates enough cartridges for
the slots available. That is, if your library has 100 slots and
you specify 125 total cartridges, this command creates 100
cartridges. Likewise, if 50 cartridges were already created
for this library, this command would create only 50 more
cartridges, even though 125 are speci fi ed by the command.
Where the options are:
-a <s>
- Cartridge name (DLT, ...) (required)
-b <s>
- Barcode pre fi x (required)
-c <n>
- Capacity in gigabytes (required)
-i <n>
- Barcode start index (required)
-l <s>
- Library name (Library_0, ...) (required)
-n <n>
- Number of cartridges (required)
-ov <n>
- Oversubscribe (0 or 1) (required)
-u <n>
- Barcode suf fi x length (required)
-y <n>
- Cartridge type (2, ...) (required)
-h
- Displays command usage information (optional)
getCartridges
Returns a list of the cartridges that have been created. All
cartridges have both a VLS fi lename (cartridge name) and a
barcode label. This command returns the following cartridge
metadata:
• Storage pool the cartridge resides (SD_1_0)
• Cartridge VLS
fi lename
• Cartridge capacity (in GB)
• Consumed capacity (in GB)
• Cartridge type
• Timestamp value for when it was last loaded
• Whether or not it is write-enabled (0) or write-protected (1)
• Library to which it belongs
• Barcode label
getCartsByLib
Returns a list of the cartridges associated with the speci fi ed
library. Where the options are:
-a <s>
- Name of library (Library_0, ...) (required)
-h
- Displays command usage information (optional)
HP StorageWorks
113