HP HPE ProLiant DX360 Gen10 Скачать руководство пользователя

Страница: 58 / 187

a. Extend the server from the rack (Extend the server from the rack).

b. Remove the server from the rack (Remove the server from the rack).

Remove the access panel (

Remove the access panel).

Locate any NVDIMMs already installed in the server.

Verify that all LEDs on any installed NVDIMMs are off.

Install the NVDIMM.

Install and connect the HPE Smart Storage Battery, if it is not already installed.

•

Installing an energy pack in 8 SFF and 4 LFF configurations

•

Installing an energy pack in the 10 SFF SAS/SATA/NVMe Combo backplane configuration

Install any components removed to access the DIMM slots and the HPE Smart Storage Battery.

10. Install the access panel.

11. Slide or install the server into the rack.

12. If removed, reconnect all power cables.

13. Power up the server.

14. If required, sanitize the NVDIMM-Ns. For more information, see NVDIMM sanitization.

Configuring the server for NVDIMMs

After installing NVDIMMs, configure the server for NVDIMMs. For information on configuring settings for NVDIMMs, see
the HPE 16GB NVDIMM User Guide on the Hewlett Packard Enterprise website (

https://www.hpe.com/info/nvdimm-

docs).

The server can be configured for NVDIMMs using either of the following:

Hardware options installation

Содержание HPE ProLiant DX360 Gen10




























































































































































































Результаты поиска

Содержание HPE ProLiant DX360 Gen10

Отзывы:

Похожие инструкции для HPE ProLiant DX360 Gen10

Бренды по названию

Популярные бренды

HP HPE ProLiant DX360 Gen10, Руководство пользователя

Результаты поиска

Содержание HPE ProLiant DX360 Gen10

Отзывы:

Похожие инструкции для HPE ProLiant DX360 Gen10

Бренды по названию

Популярные бренды