HP HPE ProLiant DX360 Gen10 Скачать руководство пользователя страница 159 | Manualshive

Страница: 159 / 187

background image

To download the product, go to the Hewlett Packard Enterprise Software Depot (

https://www.hpe.com/support/

softwaredepot). Click Insight Management, then click Insight Cluster Management.

Integrated Management Log

The IML records hundreds of events and stores them in an easy-to-view form. The IML timestamps each event with one-
minute granularity.

You can view recorded events in the IML in several ways, including the following:

• From within HPE SIM

• From within the UEFI System Utilities

• From within the Embedded UEFI shell

• From within the iLO web interface

Intelligent Provisioning

Intelligent Provisioning is a single-server deployment tool embedded in ProLiant servers and HPE Synergy compute
modules. Intelligent Provisioning simplifies server setup, providing a reliable and consistent way to deploy servers.

NOTE:

• Rapid Setup Software is only available on the ProLiant 300 Series servers or below. When you launch F10 mode from

the POST screen, you are prompted to select whether you want to enter the Intelligent Provisioning or HPE Rapid
Setup Software mode.

• After you have selected a mode, you must reprovision the server to change the mode that launches when you boot to

F10.

Intelligent Provisioning prepares the system for installing original, licensed vendor media and Hewlett Packard Enterprise-
branded versions of OS software. Intelligent Provisioning also prepares the system to integrate optimized server support
software from the Service Pack for ProLiant (SPP). SPP is a comprehensive systems software and firmware solution for
ProLiant servers, server blades, their enclosures, and HPE Synergy compute modules. These components are preloaded
with a basic set of firmware and OS components that are installed along with Intelligent Provisioning.

IMPORTANT: HPE ProLiant DX/XL servers do not support operating system installation with Intelligent
Provisioning, but they do support the maintenance features. For more information, see "Performing Maintenance" in
the Intelligent Provisioning user guide and online help.

After the server is running, you can update the firmware to install additional components. You can also update any
components that have been outdated since the server was manufactured.

To access Intelligent Provisioning:

• Press

F10 from the POST screen and enter either Intelligent Provisioning or HPE Rapid Setup Software.

• From the iLO web interface using

Lifecycle Management. Lifecycle Management allows you to access Intelligent

Provisioning without rebooting your server.

Intelligent Provisioning operation

NOTE: Intelligent Provisioning 3.40 and later requires iLO firmware version 2.10 or later.

Software and configuration utilities

159

«
...
157
158
159
160
161
...
»

Содержание HPE ProLiant DX360 Gen10




























































































































































































Отзывы:

Нет отзывов

Похожие инструкции для HPE ProLiant DX360 Gen10

Бренд: TYAN Страницы: 221

UniServer R4900 G5

Бренд: H3C Страницы: 141

eServer BladeCenter HS40 Type 8839

Бренд: IBM Страницы: 120

Бренд: d3 Technologies Страницы: 10

Бренд: Avaya Страницы: 119

Бренд: Portwell Страницы: 21

iPlanet Web Server

Бренд: Sun Microsystems Страницы: 62

Бренд: Brocade Communications Systems Страницы: 176

Multi-Port Fast Ethernet Print Server FPS-3121

Бренд: Planet Страницы: 57

DeviceMaster LT

Бренд: Comtrol Страницы: 136

Бренд: IBM Страницы: 68

206m - eServer xSeries - 8485

Бренд: IBM Страницы: 92

Бренд: Gigabyte Страницы: 21

Бренд: Miranda Страницы: 266

Dual Processor AS 1020C-3

Бренд: Supero Страницы: 106

Бренд: GIGA-BYTE TECHNOLOGY Страницы: 96

Бренд: GIGA-BYTE TECHNOLOGY Страницы: 99

Бренд: GIGA-BYTE TECHNOLOGY Страницы: 142

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды