HP HPE ProLiant DX360 Gen10, Руководство пользователя

Страница: 119 / 187

CAUTION: Be sure to tighten each heatsink nut fully in the order indicated. Otherwise, boot failure or
intermittent shutdowns might occur.
c. Using a T-30 Torx screwdriver, fully tighten each heatsink nut in the order indicated on the heatsink label (1 -2
-3 -4) until it no longer turns.
8. If installing a second processor, install high-performance fans in bays 7 and 8. These fans are provided with the
processor option kit.
9. Install the access panel ( Install the access panel).
10. Install the server in the rack.
11. Connect each power cord to the server.
12. Connect each power cord to the power source.
13. Power up the server (Power up the server).
Installing a high performance heatsink
Prerequisites
CAUTION: Installing a high-performance heatsink requires the installation of a processor assembly onto the
heatsink. To avoid damage to server or components, do not remove or install the processor assembly when
installing or replacing other heatsinks.
To determine when a high performance heatsink should be installed in the server, see the server QuickSpecs on the
Hewlett Packard Enterprise (
https://www.hpe.com/info/qs).
Before installing this option, be sure that you have the following:
• The components included with the hardware option kit
• T-30 Torx screwdriver
• 1/4 in flat blade screwdriver or nonconductive tool
Hardware options installation
119