4 Measurement
36
Setting span point (Span)
Set the TOC value corresponding the span point output.
1.
Perform the procedures 1. and 2. in "
Q
Transmittance output setting (Analog Set)"
(page 35).
2.
Select “Span” and press the ENT key.
The display flashes to show now the setting can be performed.
3.
Press the
▲
/
▼
key to set the span point.
▲
key: Value increases by the minimum unit of the measurement range.
▼
key: Value decreases by the minimum unit of the measurement range.
Setting range is 0 to the set value in “Setting measurement range”.
4.
Press the ENT key to confirm the setting.
Note
Zero point setting cannot be performed.
