Conformable Directive
This equipment conforms to the following directives and standards:
FCC rules
■
WARNING
This equipment has been tested and found to comply with the limits a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and radiates radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference
to radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference at his
own expense.
Installation Environment
•
Pollution Degree 2
Directives:
The EMC Directives 2004/108/EC in accordance with Article 10 (1)
of the Directive.
The Low Voltage Directive 2006/95/EC
Standard:
[The EMC Directive] EN61326-2-3: 2006
(Emission: Class A, Immunity: for Industry location)
[The Low Voltage Diretive] EN61010-1: 2001
This equipment shall not be used in the residential, commercial and
light-industrial environment.
Note
If the sensor cable, transmission cable, or junction cable is extended to 30 m or longer,
this product does not conform with the surge immunity specified in the EMC directives.
