4 Measurement
24
4.4.1
System setting (System Set Menu)
Q
Setting for when measurement stops (Meas.Set Menu)
1.
Refering to "
Q
Opening each setting menu" (page 23), display the setting screen
of system setting “System Set Menu”.
Now the system setting item can be selected with this screen.
2.
Select "Meas. Stop Set" and press the ENT key.
The select the setting item screen will appear when measurement stops.
Setting of UV lamp operation (UV Off)
Select whether the UV lamp is turned ON or OFF when measurement stops.
1.
Perform the procedures 1. and 2. in "Setting for when measurement stops (Meas.
Stop Set)".
2.
Select "UV Off" and press the ENT key.
Setting is now possible and the display flashes.
3.
Use the
▲
and
▼
keys to select the desired operation for the UV lamp.
▲
key: "Yes" (The UV lamp is turned OFF.)
▼
key: "No" (The UV lamp is left ON.)
4.
Press the ENT key to register the setting.
Tip
z
As this instrument uses a UV lamp, for safety purposes, we recommend that the lamp is turned
OFF when the water supply is terminated.
z
When pressing the MENU key, the menu goes back to the previous menu.
Delay time setting (Delay)
Sets the amount of time that will elapse between input of the external signal and the point that
the UV lamp is turned off OFF when the "Setting for of UV lamp operation" has been set to
"Yes".
1.
Perform stepsthe procedures 1. and 2. under in "Setting for when measurement
stops (Meas. Stop Set)".
2.
Select "Delay" and press the ENT key.
Setting is now possible and the display flashes.
3.
Use the
▲
and
▼
keys to select the UV operation time.
▲
key: Value increases by 1 minute.
▼
key: Value decreases by 1 minute.
The setting range is from 1 minute to 120 minutes.
4.
Press the ENT key to register the setting.
Tip
z
This setting is only available when the "Setting of UV lamp operation" has been set to "Yes".
(We recommend the delay time setting to 5 minutes)
z
When pressing the MENU key, the menu goes back to the previous menu.