Honeywell PM7600B Скачать руководство пользователя страница 55 | Manualshive

Страница: 55 / 56

Honeywell PM7600B Скачать руководство пользователя страница 55

55

63-4309—2

Failure

Control number configuration
file lost.

Symptoms

Control Number Config Has Been
Lost

displayed on the S7600A.

Cause

Checksum error in control num-
ber configuration database.
W7600A-F control functions be-
come disabled. Outputs are driven
to the de-energized position (digi-
tal and analog as digital outputs)
or to the minimum, 0% position
(analog outputs).

Remedies

Reconfigure all control algorithms
using existing archived database
from ZM7601/ZM7603 Soft-
ware. File group in ZM7601/
ZM7603 Software to download
W7600A-F is All Files or the se-
lected independent file Control
Number configuration.

PM7600B

TROUBLESHOOTING/ALARMS

Failure

Day Schedules assignments lost

Symptons

Day Schedules Assignments Lost

displayed on S7600A.

Cause

Checksum error in parameter da-
tabase.

Remedy

Reconfigure TOD schedules of
controller using ZM7601/
ZM7603 Software. Download

Schedules Files

to W7600.

Failure

Global/remote point map con-
figuration file lost.

Symptoms

Global Point Map Has Been Lost

displayed on the S7600A.

Cause

Checksum error in global point
configuration database.
W7600A-F continues to operate
normally, except for algorithms
that use the configured global
points. The global points lose their
configuration parameters, dis-
abling the algorithms that use
these points.

Remedies

Reconfigure global points using
existing archived database from
ZM7601/ZM7603 Software. File
group in ZM7601/ZM7603 Soft-
ware to download W7600A-F is
All Files or the selected indepen-
dent file Global Pt. Map Configu-
ration.

Failure

Clock parameters lost.

Symptoms

Clock Parameters Have Been Lost

displayed on the S7600A.

Cause

Checksum error in clock param-
eters database.

W7600A-F Action

Clock parameters are set to their
default values. Operation contin-
ues with the time based on a 12
hour, 50/60 Hz line and no day-
light saving time changeover.

Remedies

Download clock parameters (in-
dicated

Schedules

in ZM7601/

ZM7603 Software) using exist-
ing, archived database.

W7600 A-F does a
control lockout

W7600 A-F does a
control lockout

Failure

Event schedule parameters lost

.

Symptoms

Event Schedules Have Been Lost

displayed on the S7600A.

Cause

Checksum error in events sched-
ule parameters database.

W7600A-F Action

W7600A-F control functions con-

tinue normally but programs are
rendered partially inoperative.
Digital W7600 outputs associated
with this program are driven to
their occupied position, with no
capability for bypass. Programs
control to occupied setpoints with
no bypass capability.

Remedies

Reconfigure all TOD Schedule
programs using existing archived
database from ZM7601/ZM7603
software. File group in ZM7601/
ZM7603 Software to download
to W7600A-F is

Schedules.

«
...
53
54
55
56
»

Содержание PM7600B

























































Отзывы:

Нет отзывов