Hitachi IJ PH, Руководство по обслуживанию

Страница: 29 / 211

When you want to stop the printing in midstream, the printing can be interrupted by
selecting Abort.
・
When selecting “For test”, the printing conditions are automatically set as described
below.
Number of line : one line
Character size : 12
×
16 dots
Inter-char. Space : 1
Character height : 99
Character width : 5
Ink drop use : f/3
Product speed matching : Time based
The content of printing is as described below.
█ █ 123ABC
Printed phase Printed phase which is set at present
(16 phases in total (a phase determined to be most suitable)
from 0 to f) (any one from 0 to f)
・ When selecting “Data to be displayed”, a printing is performed under the printing
conditions/printing contents set at present.
4 Determination method of test.
Observing the print phases of from phase 0 to phase 15 (f), when a printing is not
normally performed in the range of one or more phases in the vicinity of the “print
phase which is set at present”, clogging of nozzles (including a filter) or
deterioration of ink is considered and therefore, perform the washing of nozzles,
the change of filters and the change of ink.
2-11