Hitachi HF-W2000 30, Руководство пользователя

Страница: 83 / 227

4. SPECIFICATIONS
4-8
(4) Setup menu details
The table below shows the details of the items that can be set on each menu.
Menu Setup item Default value Remarks
Main System Date These items must be set at the initial
setup.
System Time
DRIVE1 Auto (*1)
DRIVE2 Auto
DRIVE3 Auto
Boot Options
Beep on boot Disabled Only turns ON/OFF the beep at
bootup. Regardless of this setting, the
beep at an error occurrence is always
ON.
Reset button function Reset Sets up the reset button function. A
setting change to “NMI” gives you
more chances of non-maskable
interrupt, thereby increasing the
possibility of successful memory dump
initiated by the reset button at an error
occurrence during OS
startup/shutdown. For details of
memory dump, see Section 7.2,
“Memory Dump Collecting Feature”.
QuickBoot Mode Disabled A setting change to “Enabled” causes
memory check processing to be
skipped, thereby shortening the startup
time. Keep the “Disabled” setting in
practical use.
Correctable ECC Error Pass Selects, upon encountering a
correctable ECC error, whether to stop
the ongoing startup and show a
message prompt to continue or cancel,
or to ignore such an error and continue
the startup.
System Memory Auto —
Extended Memory Auto
(Continued on next page)
*1 DRIVE1 through DRIVE3 are assigned to devices as shown below.
ID under BIOS Device assignment
D model (HJ-2035vwxyD) A model (HJ-203*vwxyA,HJ-203*vwxyS and HJ-2030vwxyB)
DRIVE1 RAID HDD1
DRIVE2 none HDD2
DRIVE3 DVD drive DVD drive