Hitachi HF-W2000 30, Руководство пользователя

Страница: 155 / 227

7. MAINTENANCE ACTIONS
7-22
MESSAGE
When execution of the mdump command (either copying or expanding the memory
dump files) is complete, a termination code 0 is returned. At the same time, one of
the following completion messages may be displayed.
Table 7-5 Completion Messages with mdump Command
Completion Message Explanation
Warning: Memory dump file
was not copied. The Equipment could not copy the memory dump file.
Warning: Minidump files were
not copied. The Equipment could not copy some of the Small Memory
Dump files.
Note: In some cases, a completion message may accompany the error message
described below.
When execution of the mdump command ends in an error, either of the error
messages below is displayed and a termination code 1 is returned.
Table 7-6 Error Messages with mdump Command
Error message Explanation
Error: Systemcall failed. (%s, %x)

%s: Name of error-detected
function for Windows API.

%x: Error code of Windows
API.
An internal error occurred.
You do not have the privilege to
run this command. Please run this
command again on
“Administrator: Command
Prompt”.
You do not have the Administrator privilege. Log on to
the local computer as a member of the Administrators
group and then retry the command execution. If User
Account Control (UAC) is enabled, activate the
command prompt as administrator and retry the
command execution. (Windows® 7 only)