Hioki ST4030, Инструкция по эксплуатации

Страница: 115 / 256

107
Memory Function
8.4 Memory Function
Saves the test results to the memory in the instrument. (1000 tests max.)
You can save the test results that have been stored to USB memory.
Further, you can acquire the saved data using communications commands.
The items saved by the memory function are described below.
• Measurement status
• Total judgment results
• Judgment functions judgment values and judgment results
IMPORTANT
• The test results are saved to internal memory in test mode only. The test results are not saved in test
conditions settings mode or BDV mode.
• If the memory function is enabled, the number of items presently stored in memory is displayed on the
measuring screen.
• Internal memory is automatically deleted if memory data is saved to USB memory or data is acquired
using communications commands.
• Acquire the measurement results saved inside the instrument either by saving them to USB memory or by
acquiring them using communications commands. For the memory data output format, see the memory
data acquisition commands in the “Communications Commands Instruction Manual” on the application
disk.
• If the instrument memory is full, subsequent measured values will not be saved. If restarting saving, either
read from the instrument internal memory, or delete memory data.
8
Other Functions