manualshive.com logo in svg

Hioki ST4030, Инструкция по эксплуатации, Страница: 9 / 256

Поделиться
Скачать
Hioki ST4030 Скачать руководство пользователя страница 9

1

Introduction

Introduction

Thank you for choosing the Hioki ST4030, ST4030A Impulse Winding Tester. Preserve this manual 

carefully and keep it handy to make full use of this instrument for a long time. Read the separate 

document “Operating Precautions” carefully before using the instrument.

Target audience

This manual has been written for use by individuals who use the product in question or who teach 

others to do so.

It is assumed that the reader possesses basic electrical knowledge (equivalent to that of someone 

who graduated from the electrical program at a technical high school).

Trademarks

 

• Windows is either registered trademarks or trademarks of Microsoft Corporation in the United 

States and other countries.

 

• Any other products and company names are generally either trade names, registered trademarks 

or trademarks of respective companies.

10

9

8

7

6

5

4

3

2

1

Appx.

Ind.

Содержание ST4030

































































































































































































































































Отзывы:

Нет отзывов