Hioki ST4030 Скачать руководство пользователя страница 33

Страница: 33 / 256

Switching Test Conditions (Table

Functions)

3.1

Overview

• The test conditions, judgment conditions, and master waveform are saved to the instrument’s

internal memory as settings tables.

A maximum of 255 settings tables (No. 001 to No. 255) can be created.

• Select a table that creates the master waveform in test conditions settings mode to acquire the

master waveform.

• Select the table to which the master waveform to be used in the test was saved in test mode, and

implement the test.

• Even if the instrument’s power supply is turned OFF, the settings table details will be retained.

Overview of test conditions switching functions

You can save multiple test conditions, judgment conditions, and master waveforms as settings

tables and switch between them as desired.

Number of settings saved

255

Retained settings

Test conditions, judgment conditions, and master waveforms

Switching between settings

tables

Switch using screen operations, communications, and signal inputs

to external control terminal (EXT. I/O).

Settings table settings

initialization

Restores the settings such as the master waveforms in the settings

tables to their default settings.

Settings table name settings

Add a user-selected name to each settings table (127 characters

max.)

Default value: TBL_XX (XX is the table number)

IMPORTANT

Select the table to be used, and change the test conditions and acquire the waveform. Changing the test

conditions and acquiring the waveform will overwrite the previous settings.

3 Switching Test Conditions (Table Functions)

Switching

Test Conditions (T

able Functions)

Содержание ST4030

































































































































































































































































Результаты поиска

Содержание ST4030

Отзывы:

Hioki ST4030, Инструкция по эксплуатации, Страница: 33 / 256

Результаты поиска

Содержание ST4030

Отзывы: