Hioki ST4030 страница 173 Скачать руководство пользователя

Страница: 173 / 256

165

USB Host

12.1

Overview

You can save the measured value and instrument settings to USB memory. Further, you can also

import the settings that have been saved to USB memory to the instrument.

How to save data

You can save data from the instrument to USB memory.

• Test results (CSV file format)

• Measurement screen (BMP file format)

• Memory data (See “8.4 Memory Function” (p. 107))

• Instrument settings (user-defined table settings, all settings)

Importing data

You can import data from USB memory to the instrument.

• Instrument settings (user-defined table settings, all settings)

File operations

You can implement operations on USB memory.

• Formatting (initializing) USB memory

• Deleting files and folders

• Creating folders

• Changing the names of files and folders

CAUTION

• Make sure not to insert USB memory with the incorrect orientation. There is a risk of

damaging either USB memory or the instrument.

• To avoid corrupting the data in USB memory, do not turn OFF the instrument power

supply while USB memory is being accessed. Further, make sure not to remove the

USB memory from the instrument. When accessing USB memory, the USB icon

changes from blue to red.

• Do not move the instrument while USB memory is connected. There is a risk of

damaging the USB memory.

• There is a risk of static electricity causing USB memory malfunction or instrument

misoperation, so handle with care.

IMPORTANT

•

USB memory has a service life. If using for a long period of time or frequently, data memory and import

may become disabled. In such cases, buy a new memory.

•

Data saved to USB memory cannot be indemnified not matter what the details or cause of any

malfunction or damage. Make sure to back up all important data on USB memory.

12 USB Host

USB Host

Содержание ST4030

































































































































































































































































Результаты поиска

Содержание ST4030

Отзывы:

Похожие инструкции для ST4030

Бренды по названию

Популярные бренды

Hioki ST4030, Инструкция по эксплуатации

Результаты поиска

Содержание ST4030

Отзывы:

Похожие инструкции для ST4030

Бренды по названию

Популярные бренды