Hioki PQ3198, Инструкция по эксплуатации

Страница: 77 / 304

4.8 Verifying Settings and Starting Recording
71
Chapt
er
4 Configuring the
Instrument
before Me
asuremen
t (SYS-
TEM - SYSTEM screen) and W
iring
4
C
Once you have determined that the settings are appropriate, start recording by pressing the START/
STOP key. Verify that the event icon ( ) is not orange (indicating that the event is occurring fre-
quently) and that measured values and waveforms on the
[VIEW]
screen are normal.
 If the event icon is appearing frequently
Verify which event is occurring with the event list on the
[EVENT]
screen and change the problematic
event threshold on the
[SYSTEM]
screen.
 If measured values or waveforms are abnormal
Change the measurement condition settings on the
[SYSTEM]
screen and verify measured values
again.
Repeat these steps until there are no other problems.
4.8 Verifying Settings and Starting Recording
Verify

Check how frequently the event icon is appearing.

Select the
[VIEW]
screen and check measured values and
waveforms.
See: Chapter 6 (p.97)
No problem
Start recording.
See: "Start and Stop Recording" (p.22)
Problem
Change settings

Change the settings on the
[SYSTEM]
screen.
See: Chapter 5 (p.73)
Check again

Check how frequently the event icon is appearing.

Select the
[VIEW]
screen and check measured values
and waveforms.
No problem
Change settings

Change the settings on the
[SYSTEM]
screen.
See: "4.2Setting the Clock" (p.54)
Problem
Check the clock
No problem
HIOKI PQ3198A961-03