Hioki PQ3198, Инструкция по эксплуатации

Страница: 103 / 304

6.1 Using the VIEW screen
97
Chapte
r 6 Mon
itoring Insta
ntaneou
s V
alues
(VIEW
Screen)
6
The VIEW screen is composed of a number of screens corresponding to the DF1 to DF4 (DF: dis-
play function) keys. When you press a DF key, the screen corresponding to that key appears.
Each time you press the same DF key, the display changes.
Normal screen display:
Displays the current measurement screen.
Note:
[Waiting]
From the time the START/STOP key is pressed
until measurement actually starts, settings are
shown as
[Waiting] . Settings are also shown as
[Waiting] when measurement has been stopped
due to use of repeated recording.
Screen display after an event is selected:
This screen is shown when an event is selected on
the
[EVENT] screen in [Analyzing] mode. As
shown in the screenshot to the right, the event num-
ber, time and date, and type are displayed.
See: "8.3 Analyzing the Measurement Line Status
When Events Occur" (p.147)
Monitoring Instantaneous Values
(VIEW Screen)
Chapter 6
6.1 Using the VIEW screen
VIEW screen selector
Waveform
See: "6.2 Displaying Instantaneous Waveforms" (p.98)
Harmonics
See: "6.3 Displaying Phase Relationships ([VECTOR] Screen)" (p.102),
"6.4 Displaying Harmonics" (p.105)
DMM
See: "6.5 Displaying Measured Values Numerically (DMM Screen)" (p.111)
Switching screen display
About screen configuration (p.32)
The screen shown varies with the instrument's internal operating state.
Internal oper-
ating state
Display
Display
update
[Setting]
Contents of the display update during setting.
Approxi-
mately
1 second
[Waiting]
[Recording]
Contents of the latest display update during
measurement.
[Analyzing]
Contents of the display update during analysis,
or contents at the moment an event selected in
[EVENT] screen occurs.
HIOKI PQ3198A961-03