HIKVISION DS-K1T342 Series, Руководство пользователя

Страница: 160 / 205

Select the device corresponded door No.
Name
You can create a name for the door.
Open Duration
Set the door unlocking duration. If the door is not opened for the set time, the door will be
locked.
Door Open Timeout Alarm
An alarm will be triggered if the door has not been closed within the configured time duration.
Door Contact
You can set the door contact as Remain Open or Remain Closed according to your actual needs.
By default, it is
Remain Closed
.
Exit Button Type
You can set the exit button as
Remain Open
or
Remain Closed
according to your actual needs.
By default, it is Remain Open .
Door Lock Powering Off Status
You can set the door lock status when the door lock is powering off. By default, it is Remain
Closed
.
Extended Open Duration
The door contact can be enabled with appropriate delay after person with extended access
needs swipes her/his card.
Door Remain Open Duration with First Person
Set the door open duration when first person is in. After the first person is authorized, it allows
multiple persons access the door or other authentication actions.
Duress Code
The door can open by inputting the duress code when there is duress. At the same time, the
client can report the duress event.
Super Password
The specific person can open the door by inputting the super password.
Note
The duress code and the super code should be different.
Set RS-485 Parameters
You can set the RS-485 parameters including the peripheral, address, baud rate, etc.
Click
Configuration → Access Control → RS-485 Settings
.
Check
Enable RS-485
, and set the parameters.
DS-K1T342 Series Face Recognition Terminal User Manual
145