Heyer iTernIS ADV, Руководство оператора

Страница: 65 / 218

Basic operations | iTernIS ADV
6. 5
Fig. 6-3 Image with ventilation parameters highlighted, in
the SIMV(VCV)+PSV mode.
To change the value of a parameter, follow these steps:
• Press the button on the touch screen for the parameter to be modified. The field
for that parameter changes color, indicating that it can be modified.
• Turn the knob until you reach the desired value.
• Press the knob to accept.
NOTE
• If the touch screen button is pressed and after
15 seconds nothing changes, the parameter is
no longer modifiable. In the same way, if the pa -
rameter value has been changed but not accep-
ted, after 15 seconds, the parameter is no longer
modifiable, and the previous value is shown.
For spontaneous modes with no programed mandatory respiratory rate, the cha-
racteristics for a
Backup Ventilation
must be configured (to ensure that the venti -
lator continues ventilating the patient in case his/her respiratory efforts cease). In
other operative modes, it is an optional configuration. If a mode requiring
Backup
Ventilation
is selected for the first time after the ventilator is turned on, the following
steps must be followed to be able to start ventilation (see the sequence of images
in Fig. 6-4):
• Press the [Menu] key. This takes you directly to the main menu at the
Backup
Ventilation line.
• Push the knob to enter the
BACKUP VENTILATION
menu.
• Configuring
Backup Ventilation
(see the
Menu
chapter, which describes this con-
figuration).
• Press the Accept button. The window for the selected operative mode is shown be -
low, but with the message that
Backup Ventilation
has been correctly configured.
6.3.2 | Backup Ventilation