manualshive.com logo in svg

Heyer iTernIS ADV, Руководство оператора

Поделиться
Скачать
Heyer iTernIS ADV Скачать руководство пользователя страница 32

Assembly and installation | 

iTernIS ADV

3. 

8

connectors and accessories should be of those same measurements.

Fig. 3-1 shows a diagram with the patient circuit connected to the ventilator with 
the included optional accessories. The patient circuit assembly is divided into the 
inspiratory segment, the expiratory segment, the Y piece which connects both seg-
ments, the expiratory set, and the proximal pneumotachograph.

The inspiratory segment includes the elements of the patient circuit between the 
outlet opening to the patient and the Y-connection piece. The elements of this seg-
ment, from the ventilator to the patient, are:

• Short segment of hose, if the active humidifier is used. Otherwise, a 

segment of hose up to the water trap. 

• Active Heater/Humidifier (optional).

• Segment of hose up to the water trap (if the active humidifier is used).

• Water trap.

• Segment of hose up to the nebulizer (if it has this option).

• Nebulizer.

The expiratory segment connects the Y-piece to the expiratory set. The elements of this 
segment, from the Y-piece to the ventilator, are: 

• Segment of hose up to the water trap.

• Water trap.

• Section of hose up to the expiratory set.

• Expiratory Set.

The Y-piece is a single unit that links the inspiratory and expiratory segments of the pa-
tient circuit and provides the connection to the patient. The tracheal tube intermediary 
is connected to the 15 mm female opening of the piece. A capnograph or a proximal 
pneumotachograph can optionally be placed at the end to the patient. 

 
To  assemble  the  patient  circuit,  just  follow  the  order  of  the  elements  described 
above, or use the diagram in Fig. 3-1 as a reference. 

Take into account size compatibility for hoses, connectors and accessories. Main-
taining airtightness is important at every point in the circuit. Otherwise, losses with 
undesired consequences at a functional level may occur. The connection of the 
expiratory set is explained below.

PRECAUTION

• The patient circuit may have water traps in the 

middle portion of the inspiratory and/or expira-

tory segments. Ensure the airtightness of these 

devices. Any leak may cause a loss of volume 

in the circuit.

3.6.1 |

 Inspiratory Segment

3.6.2 | 

Expiratory Segment

3.6.3 |

 Y-piece -  

Connection to the Patient 

3.6.4 |

 Assembly of the Circuit 

Содержание iTernIS ADV



























































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды