Heyer iTernIS ADV, Руководство оператора

Страница: 194 / 218

Technical specifications| iTernIS ADV
17. 4
Table 17-6 Electrical Specifications
Main Supply Voltage: 100 – 240 V (automatic switching)
Frequency: 50 – 60 Hz
Maximum consumption 0.5 Amp. at 110 Volts – 0.3 Amp. at
220 Volts
Internal Battery Voltage: 10.8 V (continuous)
Electrical charge: 4.8 Ah (automatic recharge)
Autonomy: 75 minutes (approximately). Data obtained for ADL
patient category. VCV mode with preset parameter values.
Fuses F2L250V (250 V / 2 A – 0,5 mm x 20 mm).
Connectivity RS-232C.
NOTE
• When the ventilator is powered from the internal
battery, it has the same operational capacities
as when it is powered from the electrical net-
work through the main power cable, except that
capnography is disabled.
Table 17-7 Ventilatory parameters adjustment
Parameter Range Increments
(1)
Initial value
Tidal Volume (L)
ADL: 0,050 - 2,500
PED: 0,005 - 0,300
NEO-INF: 0,005 -
0,150
ADL: 0,010*
PED: 0,001*
NEO-INF: 0,001*
ADL: 0,402
(2)
PED: 0,051
(2)
NEO-INF: 0,009
(2)
Minute Volume
(MMV + PSV set -
ting)(4) (L/min)
ADL: 1 - 50
PED: 1 - 50
NEO-INF: N/A
0,100
ADL: 6,0
PED: 4,0
NEO-INF: N/A
Controlled
pressure (PCV)
(cmH
2
O)
PCV + PEEP = 2 -
100
1
ADL: 15
PED: 8
NEO-INF: 8
Support pressu-
re (PSV) (cmH
2
O)
PSV + PEEP = 0 -
100
1
ADL: 5
PED: 5
NEO-INF: 5
PEEP/CPAP
(cmH
2
O)
0 - 50 1
ADL: 5
(3)
PED: 5
(3)
NEO-INF: 3
(3)
Limited pres-
sure (in TCPL
– NEO-INF)
(cmH
2
O)
3 - 70 1 10
Continuous
TCPL flow (L/
min)
2 - 40 1 8
Inspiratory time
(s)
0,1 - 30 (APRV) 0,01*
ADL: 1,0
(3)
PED: 0,6
(3)
NEO-INF: 0,5
(3)
I:E Ratio 5:1 - 1:599 0,1:0,1
Results of the
inspiratory time
and the initial
rate.
Respiratory rate
(rpm)
ADL: 1 - 100.
PED and NEO-INF:
1 - 150.
1
ADL: 12
(3)
PED: 25
(3)
NEO-INF: 30
(3)
17.6 | Electrical
Specifications
17.7 | Ventilatory
Parameter Adjustment