c. C1E State
d. No C-states
3.
Press
F10
.
Minimum Processor Idle Power Package C-State
When the
Power Profile
is set to
Custom
, use this option to configure the lowest processor idle power
state (C-State). The processor automatically transitions into package C-States based on the Core C-
States in which cores on the processor have transitioned. The higher the package C-State, the lower the
power usage of that idle package state.
NOTE:
This option is available on servers with Intel processors.
Setting the Minimum Processor Idle Power Package C-
State
Prerequisites
Power Profile
is set to
Custom
.
Procedure
1.
From the
System Utilities
screen, select
System Configuration
>
BIOS/Platform Configuration
(RBSU)
>
Power and Performance Options
>
Minimum Processor Idle Power Package C-State
.
2.
Select a setting.
•
Package C6 (retention) State
•
Package C6 (non-retention) State
•
No Package State
3.
Press
F10
.
Advanced Power Options
• Energy/Performance Bias
• Maximum Memory Bus Frequency
• Maximum PCI Express Speed
• Dynamic Power Savings Mode Response
• Collaborative Power Control`
• Redundant Power Supply Mode
• Intel DMI Link Frequency
68
Configuring Power Management
Содержание ProLiant m510
Страница 73: ... Gen 1 Speed Gen 2 Speed 3 Save your setting Configuring Power Management 73 ...
Страница 111: ...Scripted configuration flows Scripted configuration flows 111 ...
Страница 113: ...Troubleshooting Troubleshooting 113 ...
Страница 120: ...Support 120 Support ...
