Hewlett Packard Enterprise ProLiant m510, Руководство пользователя

Страница: 55 / 125

Enabling or disabling PCIe Slot Network Boot
Use the PCIe Slot Network Boot option to enable or disable UEFI network boot for NIC cards in PCIe
slots.
Procedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration
(RBSU) > Network Options > Network Boot Options > PCIe Slot Network Boot .
2. Select a PCIe slot entry.
3. Select a setting.
• Enabled —Enables UEFI network boot for NIC cards in PCIe slots.
• Disabled —Disables UEFI network boot for NIC cards in PCIe slots.
4. Save your changes.
Pre-Boot Network Settings
Use this option to configure a preboot network interface and related settings.
IMPORTANT: If you plan to run
webclient
or
ftp
over the same interface, you do not need to
use the Embedded UEFI Shell
ifconfig
command on a network interface. The Pre-Boot
Network Settings configured in the System Utilities automatically selects these interface.
If the interface used by
ftp
and
webclient
are configured by
ifconfig
, that setting is erased.
Instead, the System Utilities Pre-Boot Network Settings menu is applied on the interface when the
commands are run.
• Pre-Boot Network Interface —Specifies the network interface used for preboot network connections.
◦ Auto (default)—The system uses the first available port with a network connection.
◦ Select Specific Port — The system uses the selected NIC port.
• DCHPv4 — Enables or disables obtaining the preboot network IPv4 configuration from a DHCP server
for Network operations from the Embedded UEFI Shell.
◦
Enabled — Enables DHCPv4 network address configuration. Individual settings are not available.
◦ Disabled — Disables DHCPv4 address configuration, requiring you to configure the following static
IP address settings manually.
–
IPv4 Address
– IPv4 Subnet Mask
– IPv4 Gateway
– IPv4 Primary DNS
– IPv4 Secondary DNS
Configuring Network Options 55