Hewlett Packard Enterprise ProLiant m510, Руководство пользователя

Страница: 63 / 125

Prerequisites
• Boot Mode is set to UEFI Mode .
• Embedded UEFI Shell is enabled.
Procedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration
(RBSU) > Embedded UEFI Shell > UEFI Shell Script Auto-Start .
2. Select a setting.
• Enabled —The UEFI Shell startup script executes during Shell startup.
• Disabled —The UEFI Shell startup script does not execute during Shell startup.
3. Save your setting.
Shell Auto-Start Script Location
Use this option to select the location of the Embedded UEFI Shell startup script. When UEFI Shell Script
Auto-Start is enabled, this setting specifies where the Shell looks for the
startup.nsh
file. When set to
Auto , the Shell looks for the script file in any of the FAT16 or FAT32 file systems available.
Setting the Embedded UEFI Shell startup script location
Use the Shell Auto-Start Script Location option to select the location of the Embedded UEFI Shell
startup script. When UEFI Shell Script Auto-Start is enabled, this setting specifies where the Shell looks
for the
startup.nsh
file.
Prerequisites
• Embedded UEFI Shell is enabled.
• UEFI Shell Script Auto-Start is enabled.
Procedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration
(RBSU) > Embedded UEFI Shell > Shell Auto-Start Script Location .
2. Select a setting.
• Auto —The Shell attempts to retrieve the startup script from the network location first, followed by
locally attached media.
• File Systems on Attached Media —The Shell looks for the
startup.nsh
script file on a UEFI-
accessible local file system, such as a FAT32 partition on a USB disk or HDD.
• Network Location —The Shell looks for a
.nsh
script at an HTTP/HTTPS or FTP location
accessible to the system.
3. Save your setting.
Configuring the Embedded UEFI Shell 63