Setting the Power Regulator mode
Prerequisites
Power Profile
is set to
Custom
.
Procedure
1.
From the
System Utilities
screen, select
System Configuration
>
BIOS/Platform Configuration
(RBSU)
>
Power Management
>
Power Regulator
and press
Enter
.
2.
Select a setting and press
Enter
.
a. Dynamic Power Savings Mode
— Automatically varies processor speed and power usage based
on processor utilization. This mode uses an ROM-based algorithm to monitor processor activity. It
can reduce overall power consumption with little or no impact to performance, and does not require
OS support.
b. Static Low Power Mode
— Reduces processor speed and power usage. Guarantees a lower
maximum power usage for the system. This mode is useful in environments where power
availability is constrained and it is critical to lower the maximum power use of the system.
c. Static High Performance Mode
— Processors run in the maximum power and performance state,
regardless of the OS power management policy. This mode is useful in environments where
performance is critical and power consumption is less important.
d. OS Control Mode
— Processors run in their maximum power and performance state at all times,
unless the OS enables a power management policy.
3.
Press
F10
.
Minimum Processor Idle Power Core C-State
When the
Power Profile
is set to
Custom
, use this option to select the lowest idle power (C-State) of the
processor that the operating system uses. The higher the C-State, the lower the power usage of that idle
state. .
Setting the minimum processor idle power core C-State
Prerequisites
Power Profile
is set to
Custom
.
Procedure
1.
From the
System Utilities
screen, select
System Configuration
>
BIOS/Platform Configuration
(RBSU)
>
Power Management
>
Minimum Processor Idle Power Core C-State
and press
Enter
.
2.
Select a setting and press
Enter
.
a. C6 State
b. C3 State
Configuring Power Management
67
Содержание ProLiant m510
Страница 73: ... Gen 1 Speed Gen 2 Speed 3 Save your setting Configuring Power Management 73 ...
Страница 111: ...Scripted configuration flows Scripted configuration flows 111 ...
Страница 113: ...Troubleshooting Troubleshooting 113 ...
Страница 120: ...Support 120 Support ...
