Hayward OmniPL HLXPROUPG, Руководство по установке, Страница: 28 / 32

USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
26
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
Mood Color -
To alert the user of warning conditions (no flow, failed sensor, etc.), the OmniPL can change its screen color. The screen can display yellow
or red depending on the severity of the condition.
Simple Mode -
Use this selection to enable and disable icons to be displayed while in Simple Mode screen. For more information, refer to the Simple
Mode section in the Operation manual.
If Spa Side is selected (requires HLSPASIDE):
Spa Side -
Press this button to setup or modify a HLSPASIDE remote control.
Select an Aux button to configure -
The 3 Aux buttons on the HLSPASIDE can be configured to run equipment, favorites or themes. In some cases,
these buttons may be assigned to default functions. To change functions or assign a new function, select the button that you’d like to configure.
If an Aux button is selected:
Select Function -
There are 4 options available.
Equipment - Pressing this button will bring you to a screen that shows all available equipment. Select the desired equipment that you
want to assign to the Aux button.
Favorite - Pressing this button will bring you to a screen that shows all available Favorites. These Favorites had to have been defined
prior to configuring the Aux buttons. Select the desired Favorite that you want to assign to the Aux button.
Theme - Pressing this button will bring you to a screen that shows all available Themes. These Themes had to have been defined prior
to configuring the Aux buttons. Select the desired Theme that you want to assign to the Aux button
Unconfigured - If set to “Unconfigured”, the Aux button will have no function.
Controller Mounting Template
Control Pad Mounting Template