Hayward OmniPL HLXPROUPG, Руководство по установке, Страница: 16 / 32

USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
14
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
Does Cleaner Have a Pump? Select whether the cleaner has a dedicated pump. If so, the OmniPL will turn this pump on when the cleaner is
scheduled to run.
If Yes is selected:
What Type? Select the type of pump used. The choices are Single Speed, Two Speed and VSP.
If single speed or two speed pump is selected:
Which Relay is it Wired to? If using a single speed or two speed pump, you’ll be asked which relay(s) is wired to the pump
and a box will be shown. Selecting the box will bring you to a table showing all detected relays. Select the proper relay(s)
from the table and touch the Done button. The relay should now be shown in the box(es) and you can advance to the next
screen to continue the pump configuration.
Would You Like to Enable Priming?
Select whether you want the pump to prime when turned on. This will turn the pump
on at high speed for 3 minutes to establish normal water flow every time the pump is activated after being off for at least 30
seconds. This option only appears if the pump is configured as a 2-Speed pump.
If VSP is selected:
Which Hayward Unique Address?
If using a VSP for your cleaner pump, you’ll be asked what is the Hayward Unique Ad-
dress (HUA). If a value is already shown in the box, advance to the next screen. If no value is shown, selecting the box will
bring you to a table showing all detected devices. Select the proper HUA from the table and touch the Done button. The
address should now be shown in the box and you can advance to the next screen to continue the VSP configuration.
Pump Capacity - Set the minimum and maximum RPM of the pump. Refer to your pump manual for more information.
Permitted User Setting -
The OmniPL will automatically calculate these values based on the minimum and maximum RPM
that were previously entered. They can be changed as desired.
Speed Presets - Set the Low Pump Speed %, Medium Pump Speed %, and High Pump Speed %, presets. These presets
will be used when setting schedules for your pump.
Would You Like to Enable Priming?
Select whether you want the pump to prime when turned on. This will turn the pump
on at high speed for 3 minutes to establish normal water flow every time the pump is activated after being off for at least
30 seconds.
Does Cleaner have a Valve?
Select whether the cleaner requires a valve to change position when in use.
If Yes is selected:
How Many?
Select how many valves are used for the cleaner.
Where is the Valve(s) Wired? Selecting the box will bring you to a table showing all detected low voltage relays. Select the relay(s)
that is wired to the cleaner valve(s), then advance. The valve(s) should now be shown in the box(es). Advance to the next screen to
continue cleaner configuration.
Would you like your valve(s) to cycle On and Off at a set interval?
If you would like the cleaner valve(s) to cycle to a set interval
while cleaning, select Yes. Set the interval on the next screen.
Freeze Protection Enabled?
Freeze protection is used to protect the pool and plumbed equipment against freeze damage during cold tempera-
tures. If freeze protection is enabled AND the air temperature falls below the freeze threshold (refer to pump configuration), the OmniPL will turn
on the cleaner pump to circulate the water.
How Many Water Features? - This question is for THIS BODY OF WATER ONLY. For example: If you have 2 water features; one for the pool Body of Water
and one for the spa Body of Water, you would answer “1” to this question.
If “1”or more is selected:
Select and Configure a Water Feature
At this screen you can add, delete and configure your water features. Select the desired water feature,
then touch the Advance button. When finished configuring water features, you’ll be returned to this same screen. Touch the Done button and
advance to the next section of configuration. Refer to the following information when configuring water features:
Type of Water Feature?
Touch the box and select the type of water feature used. Choices are Water Feature, Water Slide, Waterfall, and Foun-
tain.
Name of Water Feature - Touch the box and use the keyboard to name the water feature.
Does Water feature Have a Pump?
Select whether the water feature has a dedicated pump. If so, the OmniPL will turn this pump on when