Hayward OmniPL HLXPROUPG, Руководство по установке, Страница: 11 / 32

9
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
Begin the Configuration Wizard
In the Configuration Wizard, select “New” to create a new Configuration file for the OmniPL. Once underway, keep advancing until you have completed the
Wizard. At the end of the Wizard, you’ll have the opportunity to save your settings or exit without saving.
BACKYARD
configuration
Yes
No
Are you finished configuring
your system?
At the end of the Wizard, save
your configuration by answer-
ing “Yes” to this screen.
BACKYARD
configuration
New
Edit
Create a New Configuration
or Edit an Existing One?
If additional pool or backyard equipment is added after initial configuration, or you’d like to make a change to an existing configuration setting, re-enter the
Configuration Wizard and select “Edit”. The initial configuration settings will be retained and you’ll have an opportunity to make changes or additions. Be sure
to save your configuration when exiting. See page 20 for a Quick Edit Guide.
Configuration Wizard Guide
As you progress through the Configuration Wizard, refer to the following information to help answer questions and make selections.
Would You Like To Set Up A Network Connection Now? - You can select whether to connect to the internet through a wired connection or wireless. If no
connection is desired or you will be setting up the connection later, select “not now”.
Enable Screen Color Changes For System Alerts? - To alert the user of warning conditions (no flow, failed sensor, etc.), the OmniPL can change its screen
color. The screen can display yellow or red depending on the severity of the condition.
Time and Date
-Set the current date and time using a 12hr clock (AM/PM) or 24hr clock (military time). Save by touching the Done button when finished. NOTE:
When registering the OmniPL and creating a web account, you’ll be prompted to enter a Time Zone. Be sure to enter the same time zone as the physical location
of the OmniPL, otherwise schedules and timers will be inaccurate.
Select Desired Units of Measure - If Standard is selected, temperatures will be displayed in Fahrenheit. If Metric is selected, temperatures will be displayed
in Celsius.
MSP ID
- The OmniPL MSP ID number will be displayed. This unique number is used to identify your OmniPL when setting up a web account. A web account
is needed to access the OmniPL over the web by mobile devices.
IMPORTANT:
write down the MSP ID number for future use. The MSP ID number will be
needed when entering the configuration wizard after initial configuration as well as entering and exiting Simple Mode. Simple Mode is a customizable screen
that can be set up for quick access to pool/spa functions and features.
How many Bodies of Water? The OmniPL can support one or two bodies of water, typically a pool and spa. Select the number and advance. You’ll be brought
to a screen where you can add, delete or edit a Body of Water. When initially configuring the OmniPL, a “?” will appear in the Body of Water button. You will
have to configure this body of water by selecting it and then touching the Advance button. When finished configuring bodies of water, you’ll be returned to this
same screen. Touch the Done button and advance to the next section of configuration.
IMPORTANT:
The following instructions are for Body of Water 1 configuration. When finished with the first Body of Water, you’ll follow the same instructions for
the second Body of Water. When configuring the second Body of Water, you’ll have the option of using “Shared Equipment”. If Shared Equipment is enabled, the
second Body of Water will use the filter pump as well as other equipment (heater, chlorinator, etc.) that has been assigned to the first Body of Water. Additionally,
you will have the option for using “Shared Heaters”. If you have dual equipment with shared heaters, this can be configured from the second Body of Water’s
configuration menu. See page 17 for more information regarding Shared Equipment in the second Body of Water configuration menu.
What is the Body of Water type? Select the type of Body of Water that you would like to configure. The choices are Pool and Spa.
Name of Body of Water
- Selecting the box will allow you to edit the name. During initial configuration, the box will be blank. Select the box and
then use the keyboard to enter the desired name of the body of water.
Size of Body of Water - Enter the Body of Water size in gallons.
How Many Filter Pumps?
- This question is for THIS BODY OF WATER ONLY. For example: If you have 2 pumps; one for the pool Body of Water and one
for the spa Body of Water, you would answer “1” to this question.