Hayward OmniPL HLXPROUPG, Руководство по установке, Страница: 2 / 32

USE ONLY HAYWARD GENUINE REPLACEMENT PARTS USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
Compatibility
The Hayward OmniPL Retrofit Kit is designed to convert your old ProLogic, AquaLogic or AquaPlus into a web enabled pool automation control with convenient
touchscreen interface. The conversion offers the next generation of technology to manage pool/spa equipment, allowing communication to web connected
computers and mobile devices. You can now conveniently monitor your pool/spa and change settings anytime and from anywhere.
This OmniPL Retrofit Kit is compatible with all “P-4”, “PS-4”, and “PS-8” units. The HLXPROUPG is not compatible with “PS-16” although two kits could be
installed (one in PS-16, one in the Expansion unit) to manage one pool. For this operation, separate the control into two sites in the mobile app.
The current control’s configured equipment, timers and settings will be lost after replacing the main printed circuit board (mainboard) with the OmniPL Retrofit
Kit mainboard. It’s important to capture all of this information before starting the installation. A worksheet is provided on the following pages to record all current
settings.
This upgrade will convert the current control to the Omni family of products and will require Omni specific accessories. Some ProLogic, AquaLogic or AquaPlus
accessories will no longer work with the OmniPL after upgrading. If you are currently using a wired or wireless remote control or an AQL-CHEM Sense and
Dispense Kit with your control, be aware that those items will not work after the upgrade. A list of Omni compatible accessories are listed below.
HLWALLMOUNT Wired Wall Mount Remote Terminal
HLWIRELESS Portable Wireless Remote Terminal
HLSPASIDE Wired Spa Remote
HL-CHEM ORP & pH Sensing Kit for monitoring and controlling pool chemistry
NOTE: For systems using a Hayward Ecostar VSP running firmware version less than R3.0.5 (pumps built before 2014), a Hayward SPX3400LCD display must
be purchased and installed on the EcoStar pump if variable speed operation is desired with the OmniPL. If single speed control is desired, no changes are
necessary.
NOTE: If the control is using networked ColorLogic Lights, the lights must be put into “Standalone” (default) mode before disconnecting the control. The OmniPL
can only control ColorLogic lights in “Standalone” mode.
FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by Hayward could void the user’s authority to operate this equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio / TV technician for help.
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
The term “IC” before the certification / registration number only signifies that the Industry Canada technical specifications were met.