manualshive.com logo in svg

Hayward OmniPL HLXPROUPG, Руководство по установке, Страница: 25 / 32

Поделиться
Скачать
Hayward OmniPL HLXPROUPG Скачать руководство пользователя страница 25

23

USE ONLY HAYWARD GENUINE REPLACEMENT PARTS

Speed - Change the Minimum and Maximum Allowed Speeds of the cleaner as well as the Low, Medium and High speed settings.  This 

option only appears if the cleaner pump is configured as a Variable Speed Pump.

Priming - Select whether you want the cleaner pump to prime.  This option only appears if the cleaner pump is configured as a 2-Speed 

or Variable Speed Pump.

Delete a Cleaner - 

From this screen, if you wish to delete a cleaner that is currently configured, select the trash can on the right of the 

name of the cleaner that you wish to delete.

If Water Features is selected:

Add Water Feature - 

Pressing “Add Water Feature” from this screen will take you through the full configuration for adding a new water 

feature.  These steps are described in the Configuration Wizard portion of this manual.

Select a Water Feature - 

Once you select a water feature, all of the options for that water feature will appear on the next screen.  These 

options are as follows:

Name - Rename the water feature to whatever name you desire.

Type - Change the type of water feature that is configured (Waterfall, Waterslide, etc.).

Pump - Configure the water feature pump, if used.

Relay - Select the relay that the water feature is wired to.  This option appears only if the water feature does not have an associated 

pump configured.

Valve - Configure the water feature valve, if used.

Speed - Change the Minimum and Maximum Allowed Speeds of the water feature pump as well as the Low, Medium and High speed 

settings.  This option only appears if the water feature pump is configured as a Variable Speed Pump.

Priming - Select whether you want the water feature pump to prime.  This option is only available if the water feature pump is config-

ured as a 2-Speed or Variable Speed Pump.

Freeze Protect - Select whether you want the water feature to turn on for Freeze Protection.  Also set the Freeze Protect air temperature 

threshold from this menu.

Delete a Water Feature -

 From this screen, if you wish to delete a water feature that is currently configured, select the trash can on the 

right of the name of the water feature that you wish to delete.

If Standalone Lights is selected:

Add Standalone Light - 

Pressing “Add Standalone Light” from this screen will take you through the full configuration for adding new lights.  

These steps are described in the Configuration Wizard portion of this manual.

Select an Existing Group of Lights - 

Once you select a group of existing lights, all of the options for those lights will appear on the next 

screen.  These options are as follows:

Name - Rename the group of lights to whatever name is desired.

Type - Select the type of lights configured.

Relay - Select the relay(s) that the group of lights is wired to.

Set Mode - Set the mode of the lights configured.

Omni Direct - If UCL was previously selected, this button will appear and allow you to test whether your UCL lights are Omni Direct 

compatible (lights built after June 2018).

Delete an Existing Group of Lights -

 From this screen, if you wish to delete a group of lights that is currently configured, select the group 

and then select the trash can button next to it. 

Содержание OmniPL HLXPROUPG

































Отзывы:

Нет отзывов