Harsen GU641B Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 60

background image

Manual

HM1016ER1

Panel Operation

Harsen

®

Page 5/54

3. Panel Operation

The operation panel consists of 3 sections: LCD display indicating measurement parameters, LED

indicator for common failure, and push buttons for Genset and selection of control modes.

LCD can display 3-row data in the same time. LCD also has a backlight so that the operator can clearly

read information day or night. After pressing any button the backlight will automatically turn off after a

preset time.

The LCD display and its control push buttons provide a friendly operational interface for the operator to

easily control the Genset, read information and parameter setting.

3.1 Control buttons and LED

Function Description

Tag

Scroll Button

Scroll menu for parameters display / enter into or exit parameters
setting by pressing and holding this button for 2sec.

MUTE / Lamp Test Button

When  failure  occurs,  alarm  buzzer  sounds.  Pressing  mute  button  will
mute  the  sound.  LCD  displays  mute  icon.  Press  it  again  will  clean
mute function,  buzzer  continues  to  sound.  Press  and  hold  this  button
for 2sec, all LEDs illuminate simultaneously.

AUTO Mode Button / LED / “+” Value Increase

The push button is used for selecting “auto mode”. When the controller
is running in AUTO mode, the LED above the button is illuminated.
The activation and deactivation of the “remote start signal input” and
“Mains Failure” controls the starting and stopping of the Genset.

When in parameters setting mode, this button is used to increase
value / scroll down menu.

MAN Mode Button / LED / “-” Value Decrease

The push button is used for selecting “manual mode”. When the
controller is running in MANUAL mode, the LED above the push button
is illuminated. The Start and Stop push buttons control the starting of
the Genset.

When in parameters setting mode, this button is used to decrease
value / scroll up menu.

TEST Mode Button / LED / “

√

√

√

√

” Confirm Parameters Configure

The push button is used for selecting “test mode”. When controller is
running in TEST mode, the LED above the push button is illuminated,
the controller starts the generator simulating Mains failure and the
activation of “remote start signal”.

When in parameters setting mode, this button is used to enter into
submenu / confirm modification.

«
...
8
9
10
11
12
...
»

Содержание GU641B





























































Отзывы:

Нет отзывов

Похожие инструкции для GU641B

Бренд: Febco Страницы: 4

Бренд: Cisco Страницы: 48

Бренд: Kasco Страницы: 3

Бренд: C Prox Ltd Страницы: 5

Бренд: Hach Страницы: 36

Бренд: Hach Страницы: 72

Бренд: tams elektronik Страницы: 12

Бренд: xpr Страницы: 4

Бренд: +GF+ Страницы: 3

Бренд: Össur Страницы: 58

ArtNet-DMX Mux16

Бренд: DMX4ALL Страницы: 21

Бренд: GBD Страницы: 60

Бренд: Bender Страницы: 28

Бренд: Hirschmann Страницы: 48

Бренд: Nibe Страницы: 84

Бренд: IBC control Страницы: 16

TempMaster M2 Plus Series

Бренд: Mold-Masters Страницы: 2

Бренд: Spirax Sarco Страницы: 24

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды