HAMPTON BAY H27, Инструкция для владельца и по установке

Страница: 43 / 60

Hampton ® H27E-11DirectVentFreestandingGasStove
| 43
operating instructions
First Fire
Thefirstfireinyourstoveispartofthepaintcuring
process.Toensurethatthepaintisproperlycured,
itisrecommendedthatyouburnyourfireplacefor
atleastfour(4)hoursthefirsttimeyouuseitwith
thefanon.Whenfirstoperated,theunitwillrelease
an odour caused by the curing of the paint, the
burningoffofanyoilsremainingfrommanufacturing.
Smokedetectorsinthehousemaygooffatthis
time.Openafewwindowstoventilatetheroomfor
acoupleofhours.
Theglasspanelmayrequirecleaningaftertheunit
hascooleddown.
DO NOT ATTEMPT TO CLEAN THE
GLASS WHILE IT IS HOT.
Note: When the glass is cold and the appliance
is lit, it may cause condensation and fog
the glass. This condensation is normal
and will disappear in a few minutes as
the glass heats up.
Operating Instructions
1. Readandunderstandtheseinstructionsbefore
operatingthisappliance.
2. Check to see that all wiring is correct and
enclosedtopreventpossibleshock.
3. Checktoensuretherearenogasleaks.
4. Makesuretheglassinthedoorframeisproperly
positioned.Neveroperatetheappliancewith
theglassremoved.
5. Verifythattheventingandcapareunobstructed.
6. Verify log placement. If the pilot cannot be
seenwhenlightingtheunit,thelogshavebeen
incorrectlypositioned.
7. The unit should never be turned off, and on
againwithoutaminimumofa60secondwait.
8.Remote control requires coding. See remote
codinginstructionsfordetails.
NOTE:Thisappliancewilloperatewith4AAback-
up batteries installed (see Back-up Battery
sectionfordetails)duringpoweroutages.Only
theoptionalfanandlightwillnotoperateuntil
powerisrestored.Iftheremoteismisplaced,
the unit can be shut off by flipping the main
ON/OFFswitch,locatedbehindthefrontcover
plate,tothe
OFFposition.
IMPORTANT:Theremotecontrolsystemsupplied
with this appliance has several options for
During the first few fires, a white film may
develop on the glass front as part of the
curing process. The glass should be cleaned
or the film will bake on and become very
difficult to remove. Use a non-abrasive
cleaner and NEVER clean the glass while
it is hot.
DO NOT BURN THE APPLIANCE WITH-
OUT THE GLASS FRONT IN PLACE.
starting/operatingtheappliance,pleasereadthe
remotecontroloperatinginstructions(packed
with remote control) to understand how to
operatethisremotesystem.
Operation Using an
Optional Wall Thermostat
AllHamptonstovesshipwithafullfunctionremote
controlasstandardequipment.Thisallowsforbasic
on/offfunctionaswellastheabilitytooperateas
athermostat.Withtheadditionofanoptionalwall
cradle (820-477-AWT available from an autho-
rizeddealer)theremotecanresideonawalland
carryoutallthefunctionsofatypicalmillivoltwall
thermostataswellasbeingabletocontrolthefan
speed,accentlightandtheflameheight.Thisisthe
recommendedprocedureforoperatingtheunitwith
athermostaticsetpoint.
Ifamillivoltwallthermostatisrequiredforbedroom
installationoraspreferredmethodofcontrollingthe
stovetherearetwooptions.
Option 1
1.Unscrewaccessdoorwith2xPhilipsheadscrews
togainaccesstoIFCboard.
2.TurnfireplaceONtheusingtheremotecontrol.
Ensure thermostat function on top right hand
cornerisinOFFpostion.Seebelow.Presetyour
desiredflameheight/Fanspeed(onlyIfoptional
fanisinstalled).
3.ConnectthermostattoON/OFFswitch(Note:ON/
OFFswitchremovedtoshowwiring).
4.Cutgreyswitchwireandstripgreyswitchwire
asshowbelow(Image3).
Image 1
Image 2
Image 3
5.Stripthermostatwiresandconnectthermostat
wirestogreyswitchwiresandMarrettewiresas
showbelow.(Image4)
6. Divorce the remote from the IFC by pressing
theblackresetButtonlocatedontheleftsideof
theunitasshownbelowuntilanaudible“beep”
isheard.Repeatthissteponemoretime,the
remotewillnowbedivorced.
*Note: The pilot flame will automatically be in
CPI mode once the remote is divorced.
*Note: if power is lost and there is no battery
backup, this would have to be repeated as
functionally is lost.
7.WiththethermostatconnectedandtheRemote
Divorced from the system, call for heat using
thewallmountedthermostat.Theunitwillfire
upwithallpresetfunctionssetontheremote.
Optional910-404/Pwallthermostatshown.
Option 2
Wallthermostatonly.Sameasoption1withstep
2bypassed.
**Pleasebeawarethatinthisconfigurationthe
accentlight,flameheightadjustmentandfanwill
notbeavailable.
Image 4
Reset Switch