HAMPTON BAY H27, Инструкция для владельца и по установке

Страница: 15 / 60

Hampton ® H27E-11DirectVentFreestandingGasStove
| 15
installation
Clearances To
Combustibles
The clearances listed are MINIMUM distances.
Measuretheclearancetoboththeapplianceand
thechimneyconnector.
The farthest distance is
correct if the two clearances do not coincide.
Forexample,iftheapplianceissetasindicatedin
oneofthefiguresbuttheconnectoristooclose,
movethestoveuntilthecorrectclearancetothe
connectorisobtained.
This appliance may be installed only with the
clearances as shown in the situations pictured.
Do not combine clearances from one type of
installation with another in order to achieve
closer clearances.
Thisunitcanbeinstalledonasolidcombustible
surface like a wood floor.This unit can also be
installeddirectlyoncarpetingorvinyl.
Use the minimum clearances shown in the dia-
gramsbelow:
H27E-NG11 & H27E-LP11 Clearances
A LeftSideWalltoUnit
*
6"/150mm
B BackWalltoUnit 3"/75mm
C VerticalVentPipetoBackWall
2"/50mm
E UnitCornertoWall 2" /50mm
UnitToptoAlcoveCeiling 24" /610mm
Minimumceilingheightis24"/610mmfromtop
ofunit.
*IMPORTANT
Itisrecommendedthatunitismovedawayfrom
thewall,ifinstallingthebloweroption,sothefan
canbeeasilyinstalledand/orserviced.
Locating Your
Gas Stove
Whenselectingalocationforyourstove,ensure
thattheclearanceslistedabovearemetaswell
asensuringthatthereisadequateaccessibility
forservicingandproperoperation.
Manufactured Mobile Home
Additional Requirements
1) Ensurethatstructuralmembersarenotcutor
weakenedduringinstallation.
2) Ensurepropergroundingusingthe#8ground
lugprovided.
3) Appliancemustbeanchoredtothefloorwith
thesuppliedanchoringmethods.
Combustion and
Ventilation Air
Thecombustionairfromthisapplianceisdrawn
from outside the building through the outer flue.
Extra provision for combustion air inside the
room is not required.
A) CrossCorner
B) RoomDivider
C) Island
D) FlatonWall
E) FlatonWallCorner
F) FlushwithWall/Alcove
ForVentTerminationrequirements,see"Exterior
VentTerminalLocations"section.
Accent Light Bulb Install
Accent light bulb is packed in the manual pack.
1.Turn off stove and allow it to return to room
temperature.
2.Liftoffcasttopandplaceonasoftsurface.
3.Loosenboltssecuringcastfront–slidelightas-
semblybracketupwardtorelease.
5.Installbulb.
Note:Oilsfromhandswillshortenthelifeofthebulbs,
donothandlebulbswithbarehands.
6.Reversestepstoreinstall.
4.Removeone(1)screwtoremovebulbhousing.