HAMPTON BAY H27, Инструкция для владельца и по установке

Страница: 36 / 60

36
|
Hampton
®
H27E-11DirectVentFreestandingGasStove
installation
Aeration
Adjustment
Theburneraerationisfactorysetbutmayneedad-
justingduetoeitherthelocalgassupply,airsupply
oraltitude.
Natural Gas 3/16" (4.76 mm)
Propane 1/4" (6.4 mm)
Theaerationadjustmentrodislocatedontheright
lowersideoftheunit.Removethesmallaccess
panel by removing 1 screw to access Aeration
AdjustmentRod-seebelow.
Gas Pipe
Pressure Testing
Theappliancemustbeisolatedfromthegassup-
plypipingsystembyclosingitsindividualmanual
shut-offvalveduringanypressuretestingofthegas
supplypipingsystemattestpressuresequaltoor
lessthan1/2psig.(3.45kPa).Disconnectpiping
fromvalveatpressuresover1/2psig.
Themanifoldpressureiscontrolledbyaregulator
builtintothegascontrol,andshouldbechecked
atthepressuretestpoint.
Note: To properly check gas pressure,
both inlet and manifold pressures
should be checked using the valve
pressure ports on the valve.
1) Makesurethevalveisinthe"OFF"position.
2) Loosenthe"IN"and/or"OUT"pressuretap(s),
turningcounterclockwisewitha1/8"wideflat
screwdriver.
3) Attachmanometerto"IN"and/or"OUT"pres-
suretap(s)usinga5/16"IDhose.
4) Lightthepilotandturnthevalveto"ON"posi-
tion.Readmanometer.
5) Thepressurecheckshouldbecarriedoutwith
theunitburningandthesettingshouldbewithin
thelimitsspecifiedonthesafetylabel.
6) Whenfinishedreadingmanometer,turnoffthe
gasvalve,disconnectthehoseandtightenthe
screw(clockwise)witha1/8"flatscrewdriver.
Note: Screw should be snug, but do not over
tighten
Push up to close or pull down to open.
Caution: Carbon will be produced if the air
shutter is closed too much.
Note: Any damage due to carboning re-
sulting from improperly setting the
aeration controls is NOT covered
under warranty.
Note: Aeration Adjustment should only
be performed by an authorized
Hampton
®
Installer at the time of
installation or service.
885 S.I.T. Valve
Description
1) 6Stageflameadjustment
2) Pilotadjustment
3) InletPressureTap
4) OutletPressureTap
5) PilotOutlet
6) MainGasOutlet
7) MainGasInlet
1
2
3 4
6
5
7
1
2
3 4
6
5
7
Aeration Adjustment Wire