HAMPTON BAY H27, Инструкция для владельца и по установке

Страница: 26 / 60

26
|
Hampton
®
H27E-11DirectVentFreestandingGasStove
installation
Flex Liner
Exhaust
Flue
A maximum
of two certified
joiner kits
may be used
per length.
#948-305 (35 ft)
Air Intake
Co-linear DV
Vertical Termination
Cap # 946-529
Co-Linear
Flex
Adapter
with Kit#
946-563
Outer
Pipe
with Kit#
946-563
Inner Pipe
Adapter
with Kit#
946-563
Venting Arrangements - Vertical Terminations
with Co-linear Flex System for both
Residential & Manufactured Homes
into Masonry Fireplaces
The shaded area in the diagram shows the allowable vertical
terminations. Note: Must remove 4 screws from stove collar
and rotate 180
o
to have collar facing straight back. Secure into
place with 4 screws.
Vertical Termination with Co-linear Flex System
This appliance is designed to be attached to
two3"(76mm)co-linearaluminiumflexrunning
thefulllengthofthechimney.SeetheVenting
Arrangements chart below for minimum and
maximum flue lengths. See chart below for
minimumdistancesfromroof.Periodicallycheck
thattheventisunrestricted.
Masonrychimneysmaytakevariouscontourswhichtheflexiblelinerwillaccommodate.However,
keep the flexible liner as straight as possible,avoidunnecessarybending.
TheAirIntakepipemustbeattachedtotheinletaircollaroftheterminationcap.
Straight Vertical Terminations
Required Parts:
Part # Description
946-529 Co-linearDVVertical
TerminationCap
948-305 3"Flex-35ft.
946-563 Co-AxialtoCo-LinearAdapterKit
whichcontainsthefollowing:
Co-linearFlexAdapter
OuterPipe
InnerPipeAdapter
Vent Restrictors
set at fully open,
Posiiton "A"
THE APPLIANCE MUST NOT BE
CONNECTED TO A CHIMNEY FLUE
SERVING A SEPARATE SOLID FUEL
BURNING APPLIANCE.
Alternate Approved Caps
46DVA-VC
VerticalTErminationCap
46DVA-VCH HighWindCap
46DVA-GK 3''Co-linearAdapterwith
flashing