HAKO Citymaster 1600, Руководство по эксплуатации

Страница: 204 / 222

204 06-1491-00-12.fm
Attachments and Options
Switching wet cleaning on
Switch on the work mode with the Hako button
Fig. 114-72
. The accelera-
tor pedals must be in the neutral position.
The wet cleaning system work mode information symbol appears in the
multifunctional display
Fig. 114-A
.
For a coded attachment, the Citymaster 1600 can automatically activate
the following functions through the Hako button:
•
The scrubbing deck is lowered (floating position)
•
The brush drives of the scrubbing deck are switched on
•
The brush speed is activated
•
The water pump is switched on
•
The suction fan is switched on
The settings for wet cleaning can be changed in the multifunctional dis-
play, see Checklist – Settings for wet cleaning. The last saved settings are
activated automatically when pressing the Hako button
Fig. 114-72
.
If the driver leaves the driver's seat, the water supply is interrupted and
the brush drives switched off.
Restarting:
•
The driver must be on the driver's seat.
•
Move the joystick
Fig. 114-70
forwards.
Basic and upkeep cleaning
•
Select the detergent, see Section Maintenance
•
Set the mixing ratio, see Section Maintenance
•
Select the brushes, see Section Maintenance
•
Set the brush speed, suction fan speed and brush pressure in the
working menu of the multifunctional display, see Section Checklist –
Settings for wet cleaning.
Apply and remove detergent in a single workstep. The squeegee can still
move freely. To do this, open the ball cock
Fig. 208-A
. Press the Hako
button
Fig. 208-72
and start the workstep.
72
Fig. 207:
A
70
Fig. 208:
72
70
A