HAKO Citymaster 1600, Руководство по эксплуатации

Страница: 78 / 222

78 03-1491-00-11.fm
Operation
3.4 Shutting down the vehicle
3.4.1 Shutting down after the end of work
1. Bring the accelerator pedal back into the neutral position or take your
foot off from the accelerator pedal. The hydrostatic drive brakes to
standstill.
2. Engage the parking brake.
3. Switch the engine off and pull out the ignition key.
4. Close the driver's cab if necessary.
3.4.2 Shutting down in work breaks
The driver must also bring all operating devices into zero position even in
short work breaks before leaving the vehicle. Engage the parking brake
and secure it against unauthorised use.
3.4.3 Shutting down on occurrence of faults
The engine of the Citymaster 1600 must be switched off immediately on
the occurrence of faults. A vehicle left lying on public roads must be
secured with the emergency signal system and warning triangle. If the
electrical system has failed, the vehicle must be secured with the warning
light.
Danger
•
Risk of accident! Adopt measures against erroneous starting and unwanted movement. Engage
the parking brake. Switch the engine off and pull out the ignition key.
•
Risk of accident! The vehicle must be parked on firm ground. On inclinations secure the vehicle
additionally against rolling away with a wheel chock.
Attention
•
Do not switch the engine off in normal operating condition from the high speed range, only in the
case of faults.
•
After full load operation, let the engine idle on for 1 to 2 minutes.
•
Do not switch the engine off when an attachment is switched on.