HAKO Citymaster 1600, Руководство по эксплуатации

Страница: 187 / 222

06-1491-00-12.fm 187
Attachments and Options
Checklist – Snow clearing
Driving to the work site
1. Bring the snow blade into the transport position, see page 162.
2. Start the vehicle with the ignition switch
Fig. 186-78
.
3. As required, switch on the dipped headlight
Fig. 186-54
, working
spotlight
Fig. 186-55
and beacon
Fig. 186-59
.
4. Drive to the work site in the transport mode. The front attachment must
be in the upper end position for the transport mode. Push the joystick
Fig. 187-70
back for this purpose.
Switching snow clearing on
1. With the joystick
Fig. 187-70
lower the snow blade into the floating
position.
2. Start snow clearing in the transport mode.
Switching spreading on
1. Switch the hydraulic oil circuit II for rear attachments on with the turn-
push knob
Fig. 187-69
.
2. Start spreading in the transport mode.
No. Description Reference
1 Driving to the work site Page 187
2 Switching snow clearing on Page 187
3 Setting the fixed engine speed Page 188
4 Starting snow clearing Page 188
Fig. 186:
1
2
P
0
78
55
54
59
Note
For snow clearing with the front sweeping machine, the pro-
cedure is similar to that described on page 170.
72
Fig. 187:
70
69
Note
Switch the spreader off with a time delay:
The spreading run-on time can be set between 0 and 4 sec-
onds in the configuration menu in the winter service menu
item.
Spreader fast emptying:
Spreader fast emptying can be switched on and off in the con-
figuration menu in the winter service menu item.