HAKO Citymaster 1600, Руководство по эксплуатации

Страница: 196 / 222

196 06-1491-00-12.fm
Attachments and Options
Mounting the squeegee
1. Place the vehicle on a level surface and hold it with the parking brake.
2. Raise the front tool carrier and fix it in the upper position with the lower-
ing valve
Fig. 196-X.
3. Remove the squeegee
Fig. 197-103
from the trolley and position it by
hand centrally under the holding plate
Fig. 197-A
.
4. Open the ball cock
Fig. 197-G
. Push the joystick
Fig. 197-70
forwards.
When the ball cock is open, the holding plate is lowered onto the
squeegee.
5. Shift the squeegee centrally under the holding plate until the stops
Fig. 197-B
come up to the points
Fig. 197-C
.
6. With the lever
Fig. 197-D
lock and secure the squeegee on the counter
bearing
Fig. 197-E
of the holding plate, see sketch
Fig. 197-F
.
7. Open the lowering valve
Fig. 196-X
again.
Fig. 196:
X
Note
If there is circulating water in the dirt hopper, the ball
cock
Fig. 197-10
of the circulating water stop valve (right side
of articulation area) must be shut off!
Fig. 197:
103
D
F
A
C
C
E
B
B
10
70
G