Haas Automation EC Series, Книга управления

Страница: 109 / 127

102
January 2004
200 H
OUR
T
RY
-O
UT
Options that normally require a unlock code to activate (Rigid Tap, Macros, etc.) can now be activated and
deactivated as desired simply by entering the letter 1 instead of the unlock code to turn it on. Enter a 0 to turn
off the option. An option activated in this manner will be automatically deactivated after a total of 200 power-on
hours. Note that the deactivation only occurs when power to the machine is turned off, not while it is running.
An option can be activated permanently by entering the unlock code. Note that the letter T will be displayed to
the right of the option on the parameter screen during the 200 hour period. Note that the safety circuit option is
an exception; it can be turned on and off only by unlock codes.
M
EMORY
L
OCK
K
EY
S
WITCH
(
OPTIONAL
)
The optional Memory Lock Key Switch will prevent the operator from altering certain areas of the control and
changing certain settings, when the key is turned to the locked position.
The following describes the hierarchy of the Key Switch locks that will lock out certain areas of the control:
Setting 7 - PARAMETER LOCK - locks parameters; parameters 57, 209 and 278 locks other areas of control.
Setting 8 - PROG MEMORY LOCK - locks out all programs.
Setting 23 - PROGS EDIT LOCK - locks out 9xxx programs.
Setting 119 - OFFSET LOCK - locks offsets.
Setting 120 - MACRO VAR LOCK - locks macro variables.