Haas Automation EC Series, Книга управления

Страница: 48 / 127

41
January 2004
All aspects of handle jogging for the fifth axis work as they do for the other axes. The exception is the method
of selecting jog between axis A and axis B . By default the ‘+A’ and ‘-A’ keys will select the A axis for jogging.
The display will show “JOGGING A AXIS HANDLE .01” while you are jogging the A axis. The B axis can be
selected by pressing the SHIFT key, and then either the ‘+A’ or ‘-A’ key. When this is done the control will
switch to jogging the B axis and the display will change to “JOGGING B AXIS HANDLE .01”.
The axis assigned to the ‘+A’ and ‘-A’ keys will remain selected for jogging even if the operating mode is
changed or if the machine is turned off. The selected axis for ‘+A’ and ‘-A’ can be toggled by pressing the
SHIFT key prior to pressing the ‘+A’ or ‘-A’ keys.
The JOG HANDLE is used in many different ways:
•
To jog one of the selected axes. Each step of the crank can be set to 0.0001, 0.001, 0.01 or 0.1 inch
(0.001, 0.01, 0.1, or 1.0 degree per step for a rotary axis). When using metric units, the smallest handle
step is 0.001 mm and the largest is 1.0 mm. The handle has 100 steps per rotation.
•
It can also be used to move the screen cursor while in the EDIT or the LIST PROG operating modes.
•
The HANDLE can be used as a screen cursor in the Offsets, Settings or Parameter displays.
•
It can be used to scroll through the HELP text, Decimal Chart and Parameters.
•
If Setting 104 JOG HANDL TO SNGL BLK is ON, you can single block step with the HANDLE through a
program with every click CCW when SINGLE BLOCK is selected and active. If you go CW with the handle,
it will feed hold.
•
The HANDLE can be used to change feed and spindle overrides by ±1% with the handle after you press
HANDLE CONTROL FEEDRATE/SPINDLE, if Setting 104 is OFF.
•
The Feed and Spindle Speed can be changed ±1% simultaneously with the HANDLE, after pressing the
HANDLE CONTROL FEEDRATE key, if Setting 144 is ON.
•
The Feed and Rapid can be changed ±1% simultaneously with the HANDLE, after pressing the HANDLE
CONTROL FEEDRATE key, if Setting 101 is ON.