H3C S12500-X, Руководство по установке

Страница: 161 / 168

152
4. Put the packed plastic panel and air filter into their boxes, respectively, and tape the flaps of the
boxes with packing tape.
Repackaging the power module
CAUTION:
Before removing a power module, switch off the circuit breakers at the input end of all power cords,
and remove all the power cords to avoid device damage and bodily injury.
To repackage a power module:
1. Prepare the packing bag and box of the power module. Make sure the bag is clean, dry, and not
damaged.
2. Remove all power modules from the chassis.
For information about how to remove a power module, see "
Replacement procedures ."
3. Put the removed power module into the bag.
4. Put the packed power module into the box, and tape the flaps of the box with packing tape.
Repackaging the card
1. Prepare the anti-static bag and box of the card. Make sure the bag is clean, dry, and not
damaged.
2. Remove the transceiver modules from the card.
If no transceiver module is installed on the card, go to the next step.
For information about how to remove a transceiver module, see "
Replacement procedures ."
3. Remove all cards from the chassis slots.
Install filler panels in the corresponding slots after you remove the chassis from the rack.
For information about how to remove the chassis from the rack, see "
Removing the chassis from the
rack ."
For information about how to remove a card and install a filler panel, see " Replacement
procedures ."
4. Put the removed card into the anti-static bag.
The cards on the S12500-X switch have protection boxes. Put the removed card into the protection
box, and then put the box into the anti-static bag.
5. Put the packed card into the box, and tape the flaps of the box with packing tape.
Repackaging the switch chassis
Removing the chassis from the rack
S12500-X switches are heavy. If possible, use a mechanical lift to move the switch.
To remove the chassis from the rack:
1. Prepare the wooden pallet base, carton, and packing bag of the chassis. Make sure they are clean,
dry, and not damaged.