GREER Company MicroGuard 510 Retrofit, Калибровка

Страница: 32 / 56

MG510R Calibration 28 W450256 Rev A 06/07
Menu 11 - auxiliary head
This menu is for entering the dimensions of the auxiliary head.
TEST
SET
Press the key adjacent to either “Menu Up” or “Menu Down” until “11 Auxiliary Head” appears in the
information window at the right.
Press the key adjacent to “11 Auxiliary Head” to enter the routine.
Press the key adjacent to “Edit”.
TEST
SET
Enter the value for the auxiliary head weight. Use the keys adjacent to the numerical values at the
bottom of the window to scroll left or right and highlight each number. Use the key adjacent to “Aux.
Weight” to enter the number. When complete, the menu will automatically change to enter the next
value. To skip to the next value, press the key adjacent to “Exit”.
Note: Numbers must be entered in thousandths of pounds (i.e. 1,000 pounds will be entered as 1.0,
and 900 pounds will be entered as 0.9).
TEST
SET
Continue entering the remaining values. After each value is entered, the menu will automatically
change to enter the next value. When all values have been entered, the main menu will be displayed.
TEST
SET
When you are finished, press the key adjacent to “Exit” to continue, otherwise, press the key adjacent
to “Edit” to correct any of the values entered.