GRASS VALLEY K2 SAN, Инструкция по установке и обслуживанию

Страница: 12 / 346

Identifies a protective grounding terminal which must be connected to earth ground prior
to making any other equipment connections.
Identifies an external protective grounding terminal which may be connected to earth ground
as a supplement to an internal grounding terminal.
Indicates that static sensitive components are present which may be damaged by electrostatic
discharge. Use anti-static procedures, equipment and surfaces during servicing.
Warnings
The following warning statements identify conditions or practices that can result in personal injury
or loss of life.
Dangerous voltage or current may be present
— Disconnect power and remove battery (if applicable)
before removing protective panels, soldering, or replacing components.
Do not service alone
— Do not internally service this product unless another person capable of
rendering first aid and resuscitation is present.
Remove jewelry
— Prior to servicing, remove jewelry such as rings, watches, and other metallic
objects.
Avoid exposed circuitry
— Do not touch exposed connections, components or circuitry when power
is present.
Use proper power cord
— Use only the power cord supplied or specified for this product.
Ground product
— Connect the grounding conductor of the power cord to earth ground.
Operate only with covers and enclosure panels in place
— Do not operate this product when covers
or enclosure panels are removed.
Use correct fuse
— Use only the fuse type and rating specified for this product.
Use only in dry environment
— Do not operate in wet or damp conditions.
Use only in non-explosive environment
— Do not operate this product in an explosive atmosphere.
High leakage current may be present
— Earth connection of product is essential before connecting
power.
Dual power supplies may be present
— Be certain to plug each power supply cord into a separate
branch circuit employing a separate service ground. Disconnect both power supply cords prior to
servicing.
Double pole neutral fusing
— Disconnect mains power prior to servicing.
Use proper lift points
— Do not use door latches to lift or move equipment.
Avoid mechanical hazards
— Allow all rotating devices to come to a stop before servicing.
Cautions
The following caution statements identify conditions or practices that can result in damage to
equipment or other property
Use correct power source
— Do not operate this product from a power source that applies more than
the voltage specified for the product.
12 K2 SAN Installation and Service Manual 2014 01 27
Safety Summaries