GRASS VALLEY K2 SAN, Инструкция по установке и обслуживанию

Страница: 310 / 346

Status information displayed Item in tree view
Binding Type, such as RAID 1
State (online or offline)
Number of Logical Units
RANK
Firmware
Vendor
State
Product ID
Capacity
Disk
Number of disks Unbound
Checking controller microcode
As explained in the previous section, to check controller microcode, in Storage Utility select the
controller in the tree view and the microcode version is displayed.
Identifying disks
When you do maintenance or service work on your RAID storage, it is important for many tasks
that you positively identify the disk or disks on which you are working. Your primary indicators
for this are the numbering of the disks in Storage Utility and the ability to flash the disk LED on a
physical disk or a group of disks.
Disk numbering for 2.5 inch disks
In Storage Utility, RAID disks are numbered with a hexadecimal convention. Disk modules are
identified based on the chassis address and physical location as follows:
Disk numbering Chassis
07 06 05 04 03 02 01 00 Primary
0F 0E 0D 0C 0B 0A 09 08
17 16 15 14 13 12 11 10
27 26 25 24 23 22 21 20 Expansion 1
2F 2E 2D 2C 2B 2A 29 28
37 36 35 34 33 32 31 30
47 46 45 44 43 42 41 40 Expansion 2
4F 4E 4D 4C 4B 4A 49 48
57 56 55 54 53 52 51 50
310 K2 SAN Installation and Service Manual 2014 01 27
Administering and maintaining the K2 SAN