GRASS VALLEY K2 SAN, Инструкция по установке и обслуживанию

Страница: 300 / 346

Clean unreferenced movies
1. In Storage Utility, click
Tools | Clean Unreferenced Movies
.
2. A message box appears “…searching …Please wait”. Observe progress.
3. A message box reports results. Respond as follows:
• If no unreferenced movies are found, click
OK
to dismiss the results.
• If unreferenced movies are discovered, you are prompted to delete them. Click
Yes
to delete
the movies or
No
to leave the movies intact.
The process writes log files to
C:\profile\cleanupDB.txt
and
C:\profile\MediaDB.txt
, which
you can check for more information.
Making a new media file system
The requirements for this procedure are as follows:
• You must access Storage Utility (via the K2Config application login) with permissions equivalent
to K2 administrator or higher.
• When you access Storage Utility, the K2 SAN must be offline.
• All iSCSI clients and K2 clients in the K2 SAN must be shut down.
If your SNFS file system name is currently “default”, when you make a new file system the name
changes to “gvfs_hostname”, where hostname is the name of the primary FSM.
NOTE: You lose all media with this procedure.
1. If you have not already done so, launch Storage Utility from the K2Config application.
2. As prompted, wait while Storage Utility gathers system information, then Storage Utility opens.
3. In Storage Utility, click
Tools | Make New File System
.
The Setting dialog box opens.
4. For the Real Time Input/Output (RTIO) rate, enter the value specified by your system design. If
you do not know this value, contact your Grass Valley representative.
300 K2 SAN Installation and Service Manual 2014 01 27
Administering and maintaining the K2 SAN