GRASS VALLEY K2 SAN, Инструкция по установке и обслуживанию

Страница: 282 / 346

3. At the bottom of the Overview section, click
Windows Firewall Properties
.
The Properties dialog box opens.
4. On the
Domain Profile
tab, set
Firewall state
to
Off
.
5. On the
Private Profile
tab, set
Firewall state
to
Off
.
6. On the
Public Profile
tab, set
Firewall state
to
Off
.
7. Click
OK
to save settings and close.
Restoring network configuration
When you restore a system from its system specific image, network configuration is also restored
to the factory default settings. This is the recommended method of restoring network configuration.
However, if for some other reason you must configure network settings manually, use the tasks in
this section to restore the default network configuration.
Verify adapter names
1. If not already open, open Network Connections as follows:
a) Open the Windows
Network and Sharing Center
control panel.
b) Click
Change Adapter Settings
.
Network Connections opens.
2. In Network Connections, click
View | Details
.
282 K2 SAN Installation and Service Manual 2014 01 27
Administering and maintaining the K2 SAN