GRASS VALLEY Encore, Руководство по настройке

Страница: 303 / 426

Encore — Configuration Manual 303
RCL Server Application
Chop Lock
When ON, Chop operation is blocked. Turn OFF to enable
the Chop feature on that device.
Salvo Lock
When ON, prevents Salvo execution from the panel.
Monitor Control
When ON, allows the panel to control system Monitor
Crosspoints while operating in Destination Mode with
each Destination Take. A Monitor Output must also be
selected using the
Dst Monitor
parameter below.
Protect Override
If ON, individual Take commands (NOT Salvos) issued
by a client will go through even if the Destination is Pro-
tected/locked by some other device. This flag should be
turned ON only if absolutely necessary.
Retain Protects
When ON, the Protects issued by a client are retained
even after the client disconnects. If the Destinations pro-
tected by this client need to be unprotected, either the
client has to reconnect and issue unprotect commands or
the user needs to unprotect the Destinations from the
Router Controller OUI. When OFF, all the Protects issued
by this client are unprotected as soon as the client discon-
nects.
Multiple Conn
Allows automation clients to have multiple simultaneous
connections from the same IP address. By default this flag
is disabled, limiting the client to one active connection at
a time from an RCL or NP client.
When the flag is disabled and a connection is active, if
another connection is attempted from the same IP
address, the previous connection (that was active) gets
dropped and the new connection will get connected.
Debug Rx
If ON, the server logs every command received by this
client on the console. Leave OFF unless you are debug-
ging.
Debug Tx
If ON, the server will logs every response sent to this
client on the console. Leave OFF unless you are debug-
ging.
Ignore Case
This feature is currently not available.
Query Only
If ON, Take, Protect, and Salvo commands from this client
are not executed. Only query commands are executed.